Uses: Recommended for bonding plastic laminates, Formica, decorative panels veneers, particle board, foam, ceramics, rubber-steel, wood, and cove base. Its fast drying and high strength formula provides the stringent requirements of the professional user. (Do not use on polystyrene plastic).

Directions:

1. STIR contact cement thoroughly until uniform in color.
2. Surfaces to be bonded must be clean and dry. Metal surface should be degreased.
3. Use a paint brush, short nap roller, apply an even coat of adhesive to both surfaces. Porous surfaces require heavier coating.
4. Allow cement to dry 15 minutes.
5. Align surfaces carefully before assembly, for bonding is immediate upon contact.
6. Apply heavy pressure evenly onto the surface with a 12 inches, 15 lbs "J" roller.
7. For best results, the temperature of surfaces, adhesive and working area should be above 65 degrees F for 24 hours before and after application.

Freeze/Thaw Stability: Will not freeze.

Storage: 15 months shelf life when kept in closed containers in cool and dry area.

Recommended Coverage: 318 sq.ft./gal. (9.5 sq. meter per liter) for one surface, when brush or roller applied.

Clean-up: Clean tools with mineral spirits.

Caution: Use this product with positive fresh air cross-ventilation. VAPORS HARMFUL.